iMax SpyBike

This application enables you to configure in a very easy way the GPS trackers.

After you buy your spybike gps tracker all you need to do is put a SIM card on it, install on your bike and let iMax SpyBike configure all the settings for you.

Once you have installed iMax SpyBike, go to settings and inform the mobile number from SIM card, apn, apn user and password for it, your mobile number, username and password for tracking site and email address.

For the 1st time setup, Go to Application Settings and :

Configure your tracker model ( spybike or spylamp T16/T18 taillight models )

1. Configure your spybike number, apn, user and pass to access provider network

2. Configure your mobile number, user and pass to access track site

3. Click "Create Login on Track Site"

4. Click "Tracking Site" to login and register your spybike gps ( will need the IMEI* from SIM CARD )

*You can get IMEI number using "Get SpyBike information"

Now go to Application to setup spybike.

1. Click Set Phone. This will register your mobile as the "receiver" of spybike sms messages

2. Click Set Apn. This will configure the apn of SIM card at spybike

3. Click Set User and Password. This will configure the user and password that spybike will use to access provider network

Done...!

You can user other functions to test, diagnose and verify your spybike.

1. "Get SpyBike Location". Your mobile will receive a sms with current gps location and a link. If spybike isn´t able to get a lock on a GPS, it will send the mobile network location

2. "Get SpyBike Information". Your mobile will receive 2 sms from spybike with it settings

3. "Get SpyBike Battery Information". Will receive a sms with battery level

4. "Test SpyBike connection with server". Will verify if spybike can connect with tracking server

5. "Upload SpyBike Information to track site". Will send current location to site. use for testing

6. "History". Will show all communication from/to your mobile/spybike

7. "Show Settings". Will show your settings ( spybike, apn, etc... )

Operation

Click "Arm" whenever you ride your bike. This will activate the vibration sensor and start tracking your bike. This is better than "arm" only when park your bike, because if you get robbed while riding, you can immediately track your bike.

If you forgot to arm spybike, you can do it anytime, but remember that spybike will "arm" only when it is "awake".

So, ajust the wake time and interval according to your ride habits.

You can also use the "key" to arm/disarm the tracking.

Click "Disarm" whenever you get home, so spybike will save battery.

Don´t worry about your ride times....ride in peace sure that your bike will be allways with you

more information access

http://www.maxtecnologia.com.br/spybike/Spybike_Instructions.pdf

http://www.maxtecnologia.com.br/spybike/track.html